Get a Free Quote

Our representative will contact you soon.

    Add company, phone or an attachment (optional)

    One file, up to 10 MB. Images, documents, CAD files or ZIP.

    Single-Stage Rotary Vane Vacuum Pump

    1.Consists of a pump housing, eccentric rotor, vanes, end covers, and exhaust valves.

    2.Vanes slide against the pump chamber wall during rotor rotation, forming suction and discharge chambers.

    3.Springs and vane motion ensure continuous contact with the chamber wall.

    4.An oil film provides effective sealing between suction and discharge chambers.

    • Overview
    • Product Advantages
    • Technical Parameters
    • Application Scenarios
    • FAQ

    Oil-Sealed Pumping with a Single-Stage Vane Mechanism

    The PUFCO single-stage rotary vane vacuum pump uses an eccentric rotor and sliding vanes to draw in, compress and discharge gas. An oil film seals the pumping chamber. Compact models support equipment integration, providing an oil-sealed vacuum source that should be selected around working pressure and gas load.

    Model-Specific Drives, Connections and Cooling Arrangements

    Standard air-cooled models avoid a dedicated cooling-water circuit where ventilation and ambient conditions are suitable. Drive and port arrangements vary by pump size, with direct or belt drives and threaded or flanged connections. Oil maintenance and exhaust treatment should be included when planning the complete vacuum installation.

    Core Design

    • Single-stage rotary vanes use an oil film for chamber sealing.
    • Compact construction helps incorporate the vacuum source into equipment.
    • Standard air cooling simplifies utility connections for suitable installation conditions.

    Configuration and Selection

    • Use working absolute pressure and effective pumping speed for selection.
    • Confirm the drive, cooling and connection arrangement for the model.
    • Plan oil maintenance and exhaust treatment alongside the connected system.

    Provide working absolute pressure, pumping-speed requirement, gas load and installation conditions for model selection.

    Why choose our air compressor solutions

    Oil-Sealed Single-Stage Pumping

    An oil film seals the sliding vanes against the chamber wall during the single-stage pumping cycle. This supports gas separation between suction and discharge in the oil-sealed vacuum mechanism.

    Compact Equipment Integration

    A compact, lightweight layout makes the pump easier to incorporate into machinery and vacuum skids, helping equipment builders accommodate the vacuum source within limited installation space.

    Standard Air Cooling

    Standard models use air cooling, removing the need for a dedicated cooling-water circuit and simplifying utility connections in installations with suitable ventilation and ambient conditions.

    Model-Matched Drive Arrangements

    Direct-drive designs serve smaller and medium pumps, while belt-driven configurations address higher-flow models, allowing the mechanical arrangement to follow the selected pump size and duty.

    Practical Connection Choices

    Threaded ports on smaller and medium units and flanged ports on higher-flow models support appropriate pipework connections, helping align the pump layout with the vacuum system.

    Straightforward Routine Maintenance

    A straightforward operating and maintenance arrangement supports routine pump care, including oil checks and scheduled servicing, helping maintenance teams keep the vacuum source ready for its assigned duty.

    Single-Stage Rotary Vane Vacuum Pump
    ItemPDXV16PDXV21PDXV40PDXV63PDXV100PDXV160PDXV200PDXV250PDXV300PDXV630PDXV750
    Pumping Speed50Hz m³/h16204063100160200250300640750
    L/s4.45.511172744556983177213
    60Hz m³/h9244878120192240300360750--
    L/s5.26.6132133536683100213
    Ultimate Pressurembar--0.50.50.50.50.50.50.50.5----
    (Trap Closed)mbar------------------0.10.1
    (Trap Open)mbar------------------0.30.3
    (Ballast Open)mbar------------------1.51.5
    Motor Power50HzkW0.550.751.11.52.244.0/5.55.57.51518.5
    60HzkW0.550.751.51.835.55.57.57.518--
    Motor Speed50Hzrpm28002800145014501450145014501450145014501450
    60Hzrpm3300330017001700170017001700170017001700--
    Noise50HzdBA6465646566727372737576
    60HzdBA64666566677374737476--
    Inlet DiameterDNG1½"G1½"G1¼"G1¼"G1¼"G2"G2"G2"G2"DN100DN100
    Outlet DiameterDN----G1¼"G1¼"G1¼"G2"G2"G2"G2"DN80DN80
    Max Water Vapor Removal50Hzkg/h--0.50.711.52.543.54.51724
    60Hzkg/h--0.50.82244.53.54.524--
    Oil-Injection QuantityL0.40.751.5228810102222
    Cooling Mode/Air-cooledAir-cooledAir-cooledAir-cooledAir-cooledAir-cooledAir-cooledAir/Water-cooledAir/Water-cooledWater-cooledWater-cooled
    Weight50Hzkg1621445469142142/145192198670850
    60Hzkg1621465975155160192198680--
    DimensionsLengthmm308421647640710760795976100615001600
    Widthmm213236307405405500700605605900900
    Heightmm207218270290290411411411411754754

    A single-stage rotary vane vacuum pump is an option for vacuum packaging, vacuum holding fixtures and general vessel evacuation where oil-sealed pumping is acceptable. Packaging cycles require the pumping speed to match chamber volume and the available evacuation time, while holding systems depend on leakage and the vacuum needed at the tooling. Inlet protection and exhaust handling should be selected for the moisture, dust and other contaminants entering from the process.

    Frequently Asked Questions

    • Q1: What routine maintenance and oil-mist control does an oil-sealed rotary vane pump need?

      ▼

      A1: Routine care includes checking the specified vacuum oil and servicing the inlet protection, exhaust oil-mist separation and cooling components fitted to the pump. Oil mist is oil carried as fine droplets in the exhaust, so the separator and discharge arrangement need attention as well as the oil itself. Set inspection and replacement intervals from the model's maintenance schedule and the actual process conditions.

    • Q2: Is this an oil-free vacuum pump?

      ▼

      A2: No. This is an oil-sealed rotary vane design. Select the specified vacuum oil and maintain the separation and exhaust components. An exhaust filter does not make the pumping mechanism oil-free or guarantee an oil-free process.

    • Q3: Do all models use air cooling?

      ▼

      A3: No. Cooling arrangements vary by model and include air-cooled, water-cooled and alternative air or water-cooled configurations. Confirm the exact cooling arrangement for the selected pump, together with its ventilation or cooling-water requirements, before planning the installation.

    • Q4: Should I compare vacuum pumps by pumping speed or ultimate pressure?

      ▼

      A4: Compare both, using the pumping speed at your required working pressure and an ultimate pressure low enough for the process. Pumping speed describes the volume of gas removed at specified conditions. Ultimate pressure is the lowest pressure reached under specified test conditions. Also allow for piping losses and leakage in the connected system.

    • Q5: What information is needed to select the pump?

      ▼

      A5: Provide the target absolute pressure, measured relative to a perfect vacuum, together with chamber volume, required evacuation time, gas composition and expected moisture or dust. Also specify the available electrical supply, cooling utilities and inlet connection so the proposed model can be checked against the process.

    Have more questions about this product? Click the chat icon in the bottom-right corner to contact our team.

    Get a Free Quote

    Our representative will contact you soon.

      Add company, phone or an attachment (optional)

      One file, up to 10 MB. Images, documents, CAD files or ZIP.

      Get a Free Quote

      Our representative will contact you soon.

        Add company, phone or an attachment (optional)

        One file, up to 10 MB. Images, documents, CAD files or ZIP.

        Get a Free Quote

        Our representative will contact you soon.

          Add company, phone or an attachment (optional)

          One file, up to 10 MB. Images, documents, CAD files or ZIP.

          email