Regeneration Gas Volume: ≤4~6% work pressure: 0.4~1.0Mpa Intake oil content: ≤0.01ppm Pressure dew point: -20℃~-70℃ Desiccant: Activated aluminium oxide or molecular sieve working cycle: T=60~180 min Inlet temperature: 0℃~45℃ Processing capability: 1.5-210Nm3/min
The micro-heat regeneration adsorption dryer works according to the principle of variable-temperature adsorption, i.e. the adsorbent adsorbs water at room temperature, and the water adsorbed by the adsorbent completes the ‘desorption’ and returns to the gas phase at a high temperature. The heat required for desorption is provided by an external heat source, and a portion of the finished gas is used as a heat carrier.
| Model | Processing capability (Nm3/min) |
Model | Processing capability (Nm3/min) |
| FAD-1WR | 1.5 | FAD-30WR | 35.0 |
| FAD-2WR | 2.6 | FAD-40WR | 45.0 |
| FAD-4WR | 4.0 | FAD-50WR | 55.0 |
| FAD-6WR | 6.5 | FAD-60WR | 65.0 |
| FAD-8WR | 8.5 | FAD-80WR | 85.0 |
| FAD-10WR | 11.0 | FAD-100WR | 110.0 |
| FAD-13WR | 13.8 | FAD-1300WR | 140.0 |
| FAD-15WR | 17.0 | FAD-150WR | 150.0 |
| FAD-20WR | 23.0 | FAD-200WR | 210.0 |
| FAD-25WR | 27.0 |
CN
