When an oil-injected screw air compressor loses pressure, runs hot, or stops unexpectedly, the cause may be in the compressor, the air treatment equipment, or the distribution system. Start by recording the controller message and checking the operating conditions.
The checks below help operators gather useful information without dismantling the machine. Follow the instructions for your specific model. Opening pressurized components, changing electrical settings, and repairing internal parts require qualified personnel and the correct isolation and depressurization procedure.

Low pressure does not automatically mean that the compressor has failed. Air demand may have increased, a leak may have developed, or a downstream restriction may be reducing the pressure available at the point of use.
Compare the compressor’s displayed discharge pressure with an existing pressure gauge farther downstream. Note whether the problem occurs continuously or only when particular equipment starts.
If compressor pressure looks normal but point-of-use pressure is low, report the pressure difference across the dryer, filters, and distribution system to your service team. A technician can then distinguish a capacity problem from a control, intake, or internal component problem.
Oil in an oil-injected screw compressor helps cool the compression process as well as lubricate and seal it. Restricted cooling airflow, a dirty cooler, unsuitable operating conditions, or an oil-related problem can therefore affect temperature.
Record the displayed temperature, ambient conditions, and how long the unit ran before the alarm appeared. Check that the room’s ventilation openings are unobstructed and that hot discharge air is not visibly recirculating into the compressor’s intake area. Review the maintenance record for cooler cleaning and the correct lubricant service.
Do not remove a filler cap or add oil while the machine is hot or pressurized. Ask qualified service personnel to check cooling performance and the oil system according to the model’s instructions. Restart only after the cause has been assessed and the alarm procedure permits it.
An oil-injected compressor separates oil from the compressed air after compression. Unexpected oil consumption or a change in downstream air quality needs investigation; it should not be addressed by simply topping up the oil more often.
Record the lubricant used, recent service work, operating pressure, and when the change began. Observe any existing oil-level indicator only as the manual specifies. Also note visible external leakage without touching hot or moving parts.
The separator and other oil-system components require a qualified assessment. If compressed air contacts a sensitive process or product, follow your site’s quality procedure and verify air quality before resuming that use. Buying an additional filter does not replace finding the cause.
Frequent cycling can reflect fluctuating demand, leaks, unsuitable control settings, or a mismatch between compressor capacity and the system’s operating pattern.
Keep a short operating log: when the unit starts, when it loads or unloads, and which production equipment is running. Record pressure readings and any changes made to the system recently.
A service or system engineer can review storage, controls, and demand together. A variable-speed screw compressor may suit some variable-demand applications, but it is not a universal remedy for leaks or an unsuitable installation.
A change from the machine’s normal sound or vibration deserves attention, especially if it occurs with an alarm or loss of performance. Stop operation using the approved procedure when abnormal operation could damage the equipment or create a hazard.
Record the alarm code and the operating state when the symptom began. A short recording from a safe location can help the service team. Do not remove guards, reach into the enclosure, or repeatedly reset a protective trip to continue production.
Provide the model and serial number, controller message, operating pressure and temperature, recent maintenance history, and a description of when the symptom occurs. Include photos of the display and installation where useful.
Routine prevention still matters: filters, lubricant, condensate drainage, connections, and scheduled servicing all need attention. See our screw compressor maintenance guide for an overview, using your model’s manual for the actual schedule.
For help assessing a fault or selecting a suitable replacement, contact PUFCO. You can also review our oil-injected screw compressor range.
We use cookies to keep this site working properly and to understand how it is used. You can accept all cookies or continue with essential ones only. Cookie policy